Fuel Screw: 1.5 turns out (1.25 turns out as shipped)
Slow Air Screw: 1.5 turns out (2.00 turns out as shipped)
Slow Jet: #55
Jet Needle: OC-ELS #5 position from top (#5 position from top as shipped)
Main Jet: #155
Main Air Jet: #200
Float Height: 9mm
I occasionally get a bit of a sneeze through the carbs, but it's usually when starting from cold and/or if the temps dip below 40F or so. When the weather get's warmer/dryer I'm going to close up the slow air screw to 1.25 turns out to see if it helps/hurts.
Also, I used the two links below as references to help set my bike up.
>Mike Wright
