|Rubber Peg Replacement for your V11 Sport
I have mounted a set of '98 Kawasaki ZX6 rubber topped foot pegs on my 2000 V11S. These require a larger OD retaining pin, so I made a hard brass bushings to take up the space and could reuse the Guzzi retaining pin. They are much more comfortable than stock. No more sleepy foot after a couple hours. They wind up just a degree above horizontal which forces my knees into the tank a bit. (Which can be resolved if you don't like this, by grinding a bit off the stop or inside base of the peg where is rests against the mount. Ed.- Todd)
Cost for the pegs is about $50 new from your local dealer, and I can offer you the bushings for $20. Contact me below.
Click HERE to see a picture of this conversion, and the bushings.